![BauerTreeEquipment](/img/default-banner.jpg)
- 292
- 1 119 628
BauerTreeEquipment
Приєднався 11 жов 2011
2009 Altec WC-126A Chipper final demo
2009 Altec WC-126A Chipper
-6″ Capacity, Under 2450 Hours
--48hp Kubota V2303M Diesel Engine
---CARB Exempt, 15″ Wheels, Electric Brakes
---Hand Fed None Hydraulic Feed, Fully serviced.
-Located near Ashland Oregon
$9,000
We have lots of other tree equipment available. We are located in Ashland Oregon and sell a variety of tree equipment but specialized in older (pre-emission, pre-ecm) brush and tree chippers and stump grinders. For more information please go to my website, email me or call directly at 541-930-2925 bauertree.com And please subscribe to my page. Thanks for watching.
-6″ Capacity, Under 2450 Hours
--48hp Kubota V2303M Diesel Engine
---CARB Exempt, 15″ Wheels, Electric Brakes
---Hand Fed None Hydraulic Feed, Fully serviced.
-Located near Ashland Oregon
$9,000
We have lots of other tree equipment available. We are located in Ashland Oregon and sell a variety of tree equipment but specialized in older (pre-emission, pre-ecm) brush and tree chippers and stump grinders. For more information please go to my website, email me or call directly at 541-930-2925 bauertree.com And please subscribe to my page. Thanks for watching.
Переглядів: 90
Відео
1998 Carlton 7500 Tow Behind Stump Grinder demo
Переглядів 50День тому
1998 Carlton 7500 Tow Behind Stump Grinder bauertree.com/carlton-7500/ -834 Hours, 75hp Deutz Diesel engine electric controls, remote compatible pintle hitch, Green Teeth, Good Condition. Will be fully serviced. Located in Ashland Oregon. -$16,000 We have lots of other tree equipment available. We are located in Ashland Oregon and sell a variety of tree equipment but specialized in older (pre-e...
2016 Vermeer SC362 Self-Propelled Stump Grinder demo
Переглядів 3414 днів тому
2016 Vermeer SC362 Self-Propelled Stump Grinder bauertree.com/2016-sc362/ -663 Hours, 35hp Briggs & Stratton gas engine hydraulic controls, Yellow Jacket Teeth TLR25 Trailer, Great Condition. Private party retirement sale. Located in Vacaville, CA. -$15,000 We have lots of other chippers available. We are located in Ashland Oregon and sell a variety of tree equipment but specialized in older (p...
2013 Ford F750 Chip Dump Truck for sale demo
Переглядів 4314 днів тому
2013 Ford F750 Chip Dump Truck for sale bauertree.com/2013-ford-f750/ -6.7L 240 HP Cummins turbo diesel 5 Speed Allison Auto Trans 25,999 GVW (under CDL), 73,036 Miles 14′ chip dump body w/ 20 cubic yard capacity Pole saw and cross-body “L” tool boxes, ladder rack PTO powered, Stereo, A/C, Hydraulic Brakes, Pintle Hitch. Great Condition, well maintained, recently serviced. CARB LEGAL! Located n...
2020 Haulotte / Bill-Jax 5533A Towable Aerial Lift demo
Переглядів 5014 днів тому
2020 Haulotte / Bill-Jax 5533A Towable Aerial Lift bauertree.com/2020-bill-jax-5533a/ -598 Original Hours, Battery Powered 61′ Working Height, 33.5′ Horizontally Reach 4 Hydraulic Auto Levelling Outriggers Weighs 4,800 lbs, 500 lbs Capacity, Tilt Alarm, Charger. Great Condition. Retirement Sale. Located in Woodland California. -$33,000 We have lots of other tree equipment available. We are loca...
2013 Altec DC1317 Chipper Demo final
Переглядів 290Місяць тому
2013 Altec DC1317 Disc Chipper bauertree.com -13" Capacity, Under 1000 Hours 85hp Kubota V3600TB Diesel Engine Dual Hydraulic Feed Rollers 16" Wheels, Electric Brakes Complete Reconditioning with many new parts. Located near Ashland Oregon -$29,000 We have lots of other chippers available. We are located in Ashland Oregon and sell a variety of tree equipment but specialized in older (pre-emissi...
1992 Brush Bandit 90 Disc Chipper pre-service demo
Переглядів 138Місяць тому
1992 Brush Bandit 90 Disc Chipper bauertree.com -37hp Wisconsin Gas Engine 9" Capacity, Approximately 1000 Hours Dual Feed Rollers, Fair Condition Ex-Muni Unit, Auxiliary Hydraulics will be fully serviced. Located in Ashland Oregon $11,000 We have lots of other chippers available. We are located in Ashland Oregon and sell a variety of tree equipment but specialized in older (pre-emission, pre-e...
2013 Altec DC1317 Chipper paint job
Переглядів 612 місяці тому
2013 Altec DC1317 Hydraulic Disc Chipper bauertree.com/ -85hp Kubota V3600 Diesel Engine, 12″ Capacity Low Hours, Dual Feed Rollers, 16″ Wheels Pintle Hitch, Electric Brakes, Good Condition Fleet Unit. Fully serviced. Located in Ashland Oregon We have lots of other chippers available. We are located in Ashland Oregon and sell a variety of tree equipment but specialized in older (pre-emission, p...
2012 Brush Bandit 250 final test
Переглядів 1843 місяці тому
2012 Brush Bandit 250XP Hydraulic Disc Chipper bauertree.com/chippers/ -97 Hp Cat C4.4T Diesel Engine (tier 3, non-ECM) 12" Capacity, 2,500 Hours, Hydraulic lift/crush Hand Crank Chute Rotator, Dual Feed Rollers 16" Wheels, Pintle Hitch, Electric Brakes Good Condition, Ex-Muni Unit, will be fully serviced. I have 2 identical units. Located in Ashland Oregon -$37,500 This was the final test of t...
2013 Carlton SP4012 Stump Grinder Demo
Переглядів 3904 місяці тому
2013 Carlton SP4012 Self-Propelled Stump Grinder, bauertree.com/ -830 Hours, 29hp Lombardini 9LD diesel engine, hydraulic controls, Green Teeth Swing and Travel Speed Controls Good Condition, Fully Serviced Located in Ashland Oregon. -$9,000 We are located in Ashland Oregon and sell a variety of tree equipment but specialized in older (pre-emission, pre-ecm) brush and tree chippers and stump gr...
2003 Brush Bandit 200+ Hydraulic Disc Chipper final Demo
Переглядів 2474 місяці тому
2003 Brush Bandit 200 Hydraulic Disc Chipper -110hp Perkins Diesel Engine, 12" Capacity 1,650 Hours, Curbside Feed, Hydraulic Lift Cylinder Chip Chute Elevator, Hand Crank Chute Rotator Dual Feed Rollers, 16" Wheels, Pintle Hitch Hydraulic Brakes, Extendable Hitch 64" Extra Wide Feed Table, Good Condition Ex-Muni Unit, Fully serviced. Located in Ashland Oregon $27,000 We are located in Ashland ...
08 Altec WC166 Chuck & Duck Drum Chipper inspection
Переглядів 2215 місяців тому
bauertree.com/chippers/ Inspecting the cutter drum on a manual feed drum chipper (chuck-n-duck). What I'm learning: Does the clutch engage well? Does it accelerate well, without overload on fuel? Does the drum spin without vibration? Do the drum bearings spin smoothly, without resistance? All answers are yes. THIS UNIT HAS BEEN SOLD, but we have lots of other chippers available. We are located ...
2012 Brush Bandit 250 pre service demo SD 480p
Переглядів 2245 місяців тому
2012 Brush Bandit 250XP Hydraulic Disc Chipper bauertree.com/chippers/ -97 Hp Cat C4.4T Diesel Engine (tier 3, non-ECM) 12" Capacity, 2,000 Hours, Hydraulic lift/crush Hand Crank Chute Rotator, Dual Feed Rollers 16" Wheels, Pintle Hitch, Electric Brakes Good Condition, Ex-Muni Unit, will be fully serviced. I have 2 identical units. One with 2,000 hours, one with 2,400. We just got these in. I h...
2003 Ford F150 8.8 to 9.7 rear end comparison H-9 axil
Переглядів 225 місяців тому
It worked! But not straight forward at all. The 9.7 is actually about 1.5" wider than the 8.8 so I had to have the drive shaft shortened by an inch. The broken yoke took forever to figure out. Spicer doesn't make it anymore and the numbers I could find didn't cross to anything. The key is the u-joint cap diameter on the original was 1.0625 (1-1/16") X 3 5/8". The yokes that available are either...
2012 Brush Bandit 250XP Disc Chipper pre-service demo
Переглядів 3285 місяців тому
2012 Brush Bandit 250XP Hydraulic Disc Chipper bauertree.com/2012-brush-bandit-250xp/ -97 Hp Cat C4.4T Diesel Engine (tier 3, non-ECM) 12" Capacity, 2,000 Hours, Hydraulic lift/crush Hand Crank Chute Rotator, Dual Feed Rollers 16" Wheels, Pintle Hitch, Electric Brakes Good Condition, Ex-Muni Unit, will be fully serviced. I have 2 identical units. One with 2,000 hours, one with 2,400. We just go...
2005 Morbark Model 2070xl Twister Hydraulic Drum Chipper demo
Переглядів 4796 місяців тому
2005 Morbark Model 2070xl Twister Hydraulic Drum Chipper demo
2008 Altec DC1217 Chipper final demo
Переглядів 3398 місяців тому
2008 Altec DC1217 Chipper final demo
1990 Hesco 4800-15 Portable Manhole Generator Power Unit
Переглядів 628 місяців тому
1990 Hesco 4800-15 Portable Manhole Generator Power Unit
2006 Brush Bandit 1590XP Hydraulic Drum Chipper final demo
Переглядів 8318 місяців тому
2006 Brush Bandit 1590XP Hydraulic Drum Chipper final demo
2008 Bandit 200 12" Hydraulic Disc Chipper service demo
Переглядів 1868 місяців тому
2008 Bandit 200 12" Hydraulic Disc Chipper service demo
1998 Carlton 2500-4 Self-Propelled Stump Grinder demo
Переглядів 30410 місяців тому
1998 Carlton 2500-4 Self-Propelled Stump Grinder demo
2008 Brush Bandit 200 pre-service demo
Переглядів 25710 місяців тому
2008 Brush Bandit 200 pre-service demo
How to remove a Stanadyne Injector pump from a John Deere 4045
Переглядів 3 тис.10 місяців тому
How to remove a Stanadyne Injector pump from a John Deere 4045
2003 Brush Bandit 200XP Disc Chipper demo 2
Переглядів 36311 місяців тому
2003 Brush Bandit 200XP Disc Chipper demo 2
2003 Brush Bandit 200XP Disc Chipper demo 1
Переглядів 50711 місяців тому
2003 Brush Bandit 200XP Disc Chipper demo 1
2013 Altec DC912A disc chipper preliminary test demo
Переглядів 48011 місяців тому
2013 Altec DC912A disc chipper preliminary test demo
2009 Brush Bandit 200 12" Hydraulic Disc Chipper demo
Переглядів 32111 місяців тому
2009 Brush Bandit 200 12" Hydraulic Disc Chipper demo
Doesn’t have anti stress system ?
So I know this demo is a little awkward. I had my son running it and this machine was pretty unfamiliar to him. Also we need to build a wired remote for it. It's pretty hard to see what your doing at the control station.
I have come across many older 280xp chippers for sale with a single axle. Were they ever under 10,000lbs? Their website is now saying 14,000lbs which is a crazy jump from one size smaller 255xp at 8,200lbs.
If its a single axil it has to be under 10klbs. But that means it has a smaller engine. All the 6 cyl diesel are over 10klbs and dual axil.
Awesome thank you so much for your reply
excellent walkaround inspection there Bauer. Your channel deserves more subscribers. Thorough and to the point.
Thanks
Thank you for posting the repair story. Diagnosing things can be quite frustrating!
i'm just letting u know you had a right front flat tire on your John Deere front tractor????
It just looks that way. Its not flat.
@@CalTreeEquip oh ok. i really like watching ur wood chipper in action demo videos.
That muffler though. It sparked and there was a little fire as you turning the engine off
Ya. It's backfiring. Easy to do with these old gas engines.
@@CalTreeEquip oh yeah.
Thanks
That one will pull you in, and chew you up...guy told me he had a coworker that wouldnt let go of the limbs..last he saw of him was his boots going in..washed him out and called the family..be careful
All chippers are dangerous.
When the machine moved to the right, was that all with the ram in the tongue? Or are the wheels powered?
Ram.
What make and year is the engine?
Ford 6 cylinder.
Ok I want to buy the engine gasket, it's leaking oil... I don't know what year. 1968 1970. It's like yours.
@@lorenzosanchez5705 Its a Ford 300 straight 6 engine. Try lookup a 1980 E150 van. They put these things in a lot of different trucks.
When the ground settles the roots he didn't grind will be a problem
The job didn't call for the roots to be ground. And the purpose of the video is to demonstrate the grinder.
Where can you buy that foot platform to bolt on?
Google Peco. If they don't have them just make one.
Good job
Thanks
I need to know the torque setting for a 12-inch whisper chipper blades
Woodchuck style blades or Asplundh style?
hours on hob meters ?
Both units have meters that had been replaced. Service records indicate 2000 and 2400 hours.
@@CalTreeEquip 👍
Super good info bought a used WC126 and wondering about changing that blades. Do you have the blades professionally sharpened or just use a grinder in maybe a jig?
Have them pro sharpened. They use a cool grinding lathe. If you do it at home you'll take the temper out of the edge.
Not better than my home built grinder
I just did my 250. Very complete job except removing the hoses. Wondering how long it takes you to do this job? It took forever on mine the engine cover had the thickest hardest paint I have ever removed.
It takes some time for sure. I don't really keep track of how much time though. We break the chipper down and send it off to the paint shop.
Is ur auto feed broken?
I don't remember. That video was a long time ago. However the Vermeer Smart Feed system is not very durable.
V6 turbine turbo diesel
No. L6 gas engine.
Matt, I have never seen a video shot in this area. Looks like a fire road?
That's my driveway.
@@CalTreeEquip wow. Cool.
Broyeur de malade 😮
Are their dust suppression systems that can be added onto chippers?
I believe Morbark makes a kit that can be bought but I would recommend you fabricate something. The main parts are the tank and brackets, the pump and the atomizers. The high tech and expensive controller is completely unnecessary. I have used tanks and brackets I could sell you. And the other parts I can tell you where to get them. But maybe contact Morbark and see what they sell the setup for. Bandit might also offer something.
Promo`SM
2 thumbs up for Bauer Tree Equipment. #HappyCustomer
Love the turbo whistle.
Hey Matt, I got this from you a few years ago. We've ran it hard! Hundreds of hours. Getting new drum bearings on it next week and a new autofeed system. Thanks for the great machine.
Glad it's working well for you.
Great tip using acetone, thanks it worked great.
You're welcome. Ya, it was better than any of the other chemicals I tried.
The auto feed and belts have been adjusted at this point. I've put about 30 hours it now, chipping big wood like this on my property last summer.
Nice! What is the output per hour?
I really don't know but it sure makes a lot of chips. I but about 30 hours on it last summer and it was extremely productive.
How much for one?! And is there a lease to own program?
@@JustinNelson-kx7qy This one is $70,000 as indicated in the add. Financing is available.
I sell chippers guys so if you are looking for one go to my website. Thanks bauertree.com/chippers/
I've got two more of these Bandit 250's. If anyone is interested in buying one or two. ua-cam.com/video/M0_MADnoZRo/v-deo.htmlsi=-eKtsZFYpRQLuH4q
Какого диаметра барабан ?
This the best how to paint a chipper video ever. Great work, Matt. I trust it will come back to you. I bought a chipper from you 7 or so years ago.
Hi Dan. You bought a 2005 Bandit 250 with a winch? How'd that chipper workout for you? Good to hear from you.
@@CalTreeEquip it’s still going strong. That chipper eats 14” trunks , granted not all day long. You may recall that the fellow who traded it in was complaining that it overheated and that was a problem for me - the heart of that problem was it needed new radiator fins and new inner cooler fins, which was a “recore” deal and pricey - however such is equipment. There has been a fair amount of patches put on the wear spots from chip abuse and angel grinding on the interior. For a season we had bad clogging issues but that was due to a poor patch at the transition zone on the chute. Basically I’ve enjoyed the chipper the majority of the time. As you know little wet leaves are trouble….We added metal to the outside of the throw scoop paddles so that there is very little lost fan propulsion and that made it throw better. Other companies have had some envy over my machine. So, it’ not ugly or pretty it’s just a workhorse. We’ve tried to take care of it and fix the problems, and I have made good money with it. The starter was replaced recently, but it may have been original. I think it’s a 2010 machine ? I really agonized in research and prayer to come to that machine and i don’t regret it. As much as I’d like shiny new drum chipper the 250 keeps getting it done. Winch line is a complete essential now. Take Care!
@@dano7189 Good to hear its all good. Ya the weak link on those 3054T's is the radiator. The fins are just too small and clog easily. Re-coring them with wider fins is the trick and keeping them really clean. Found the original video. ua-cam.com/video/hRXFBZRj0uI/v-deo.htmlsi=lOBkj6YtdTxIgi20
@@CalTreeEquip that’s fun to see. She was in her 30s there. Now she’s lookn at her late 40s just like me😂
So this was a pre-service test of this machine. Blades are dull and the engine was set at only 2000 rmps rather than the 2450 is was meant to be run at. I think it performed fine.
How to set the timing on the pump
How do you remove the spring
I need to find some of the bolts where would a good spot be to look.
Altec Parts 877-462-5832
Thanks for the video, just purchased a 93 model with hatz diesel engine.
I like it but seems doesn't keep up the wing with the speed . Engine bogs down .
I don't know what you are saying here.
@@CalTreeEquip o.nothing I was just replying to a friend
Do you still have this?
No.
If you go to my website you can see everything I have available.
Great machine, can u do some walk arounds, more demo's.
Sorry but this machine is long gone. Check my website for up to date inventory. www.bauertree.com
Handy hint is masking tape knife edge incase of a slip. Pull tape off when finished. Saves bleeding everywhere.
Do you happen to have a video on a Vermeer 1600a ? They look similar
No sorry I don't. I haven't had a BC1600 in 10 years or more. They are good chippers but the knives are uniquely hard to work on.
That’s an xp because of the shorter feed rollers
You asking a question? The HP is simply a heavier version of the XP. Larger engine, clutch, bearings, exc. Especially in the 18" series. If a chipper weighs over 10,000 lbs it requires commercial license to move. Most 18" to 20" chippers have a lite and heavy version.
That's a 15" X 60' whole White Fir log. Yes the belts are squealing but there is a reason for that. You don't want to over tighten you drive belts because it is hard on the PTO bearings. The Auto Feed is typically set for moderate wood not max capacity wood. You can see this as the log progresses from max capacity (15") down to maybe 12". If you plan on chipping the max then reset the Auto Feed so it turns off of sooner,. In this case maybe 2200 rmps rather than 2000. Otherwise manually operate the infeed until you get to smaller wood. I will reset the Auto Feed if I'm chipping a bunch of big wood but leave it at factory settings most the time because that is where it chips best. Having said that I'll probably set this one at 2100 rpms. So why didn't I do that in this video? This was a test and I managed it by myself so only had one hand free. It just show how incredibly useful these chippers are.
How many rmps is normal
I think 2600 rpms in the max constant running. They are generally tuned to 2500 but I recommend you set them at a rate that is efficient for the type of chipping you do. The lower your rmp's the less fuel you'll burn and the easier it is on the engine. So if you mostly chip brush and rarely chip sizable wood you can set it at 2400 or 2300 and you won't notice a difference in chipping speed. But if you the max power because you are always chipping big wood you'll want to set it at 2550 or even 2600. I get machines in here that are set at 2000 (same Kubota engine) to save fuel.
The lift crush and auto feed features are awesome.
Hi what’s the difference between a 90 and a 90xp? Is it just a stronger frame ?
There really isn't any difference. Not that I know of anyway. It's just marketing.
@@CalTreeEquipwould you pay 1k for a non operating one? It runs and has same engine 37hp but shuts off.
@@dogbonetc7623 Your offering it me? Where are you located? If it runs and then stops its probably an electrical or fuel issue.
@@CalTreeEquip I’m offering, Medford. Yea likely fuel pump. It has 610hrs on 37hp
@@dogbonetc7623 Unless its a total wreck, ya I can do that. Just contact me through my website. www.bauertree.com